Drive Motor for Forklift

Forklift Drive Motor - MCC's or likewise known as Motor Control Centersare an assembly of one section or more which have a common power bus. These have been used in the auto business since the 1950's, as they were made use of a large number of electric motors. Nowadays, they are used in different commercial and industrial applications.

In factory assembly for motor starter; motor control centers are fairly common practice. The MCC's include variable frequency drives, programmable controllers and metering. The MCC's are commonly seen in the electrical service entrance for a building. Motor control centers commonly are used for low voltage, 3-phase alternating current motors that vary from 230 V to 600V. Medium voltage motor control centers are intended for large motors that vary from 2300 volts to 15000 volts. These units utilize vacuum contractors for switching with separate compartments so as to accomplish power control and switching.

In places where really dusty or corrosive processes are taking place, the motor control center could be installed in a separate air-conditioned room. Typically the MCC will be positioned on the factory floor adjacent to the machines it is controlling.

For plug-in mounting of individual motor controls, A motor control center has one or more vertical metal cabinet sections with power bus. To be able to complete testing or maintenance, really big controllers can be bolted into place, whereas smaller controllers could be unplugged from the cabinet. Each and every motor controller has a solid state motor controller or a contractor, overload relays to be able to protect the motor, circuit breaker or fuses to provide short-circuit protection and a disconnecting switch to be able to isolate the motor circuit. Separate connectors enable 3-phase power to be able to enter the controller. The motor is wired to terminals situated inside the controller. Motor control centers provide wire ways for field control and power cables.

Within a motor control center, each and every motor controller can be specified with numerous various options. Some of the choices comprise: extra control terminal blocks, control switches, pilot lamps, separate control transformers, and many kinds of solid-state and bi-metal overload protection relays. They even have various classes of kinds of circuit breakers and power fuses.

There are many choices concerning delivery of MCC's to the client. They could be delivered as an engineered assembly with interlocking wiring to a central control terminal panel board or programmable controller together with internal control. On the other hand, they can be supplied prepared for the client to connect all field wiring.

Motor control centers usually sit on the floor and should have a fire-resistance rating. Fire stops can be necessary for cables which penetrate fire-rated floors and walls.

Click to Download the pdf

Forklift Parts

Parts for Sweepers and Scrubbers

Sweeper and Scrubber Parts - The first carpet sweeper was made in Iowa, USA by Daniel Hess. It was created in the 1860's and from that time scrubbers and other floor cleaning machinery have greatly evolved since then. His model had a rotating brush together with an elaborate arrangement of bellows situated on top to generate suction. We are lucky...

More

---

PowerBoss Part

PowerBoss Parts - The very first vacuum cleaners were created during the 1860's. Fortunately, floor cleaning machines and scrubbers have greatly changed since then. Daniel Hess created the first carpet sweeper in Iowa, USA. His model had a rotating brush along with an intricate system of bellows located on top to produce suction. We are lucky these days that scrubber...

More

---

Forklift Fuel Systems

Forklift Fuel System - The fuel system is responsible for feeding your engine the gasoline or diesel it needs so as to run. If whichever of the separate parts in the fuel system break down, your engine will not function correctly. There are the major components of the fuel system listed underneath: Fuel Tank: The fuel tank is a holding...

More

---

Bale Clamp

Bale Clamps - Bale clamps are actually hydraulic forklift attachments that can be used to carry bales without a pallet. This particular attachment is useful if you are stacking or moving plenty of merchandise. Bar arm clamps are actually extra accessories which can be attached to allow the operator to be able to carry cylindrical objects such as rolls of...

More

---

Industrial Jib

Industrial Jib - Forklift jibs enable the operator to reach over obstacles in an effort to place their heavy loads on decks, roofs or even elevated platforms. They are usually utilized to reach through second or third story doorways and even windows to be able to carry and distribute heaps to areas still under construction. Fork truck jibs are really...

More

---

Parts for Rough Terrain Forklift

Rough Terrain Forklift Parts - There are in reality two different categories of lift trucks within the material handling industry, the industrial model and the rough terrain model. Rough terrain forklifts initially arrived on the market in the 1940's and had been primarily used on uneven surfaces, best for areas where no covered roads were available, like building sites and...

More

---

Snow Bucket Attachments

Snow Bucket Attachments - Snow plow lift truck accessories work very well when there is a large amount of snow to clear. The fixed blade used to be able to clear snow comes in many variations of blade measurements. There is an ongoing advancement in versatile forklift attachments thanks to the advancements in technology. These attachments are essential for industrial...

More

---

Zoom Boom Parts

Zoom Boom Parts - Boom truck are often applied by phone, cable television and utilities firms as they have extended folded arms which are generally folded over the roofs of company vehicles. On the end of the extension of extendable arms more often than not sits a bucket-like apparatus. When a bucket vehicle has an extendable boom installed on the...

More

---