SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Forklift Parts - In due course, forklift parts will wear and need to be replaced. Obtaining new parts can become a pricey endeavor so one more idea is to acquire used lift truck parts. This can save much cash eventually. It is a great idea to obtain used forklift parts that have been remanufactured. These components will ensure that you are getting components which would work for a long time and be productive.
Broken or worn parts that are reproduced are a less expensive solution compared to rebuilding. With rebuilding components, only the components which are worn out or broken get replaced, which means that other wearable components could break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable parts replaced. This technique can provide the best assurance for second-hand components. All wearable components are replaced regardless of age or wear which is another rationale why remanufactured components in general work so much better. Any part within the part is new and this provides far longer life to the second-hand part. Depending on the lift truck parts which are being redone, the cleaning process and the whole remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Several components of the engine such as rings, pistons, spark plugs, valve springs, filters, and valves could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A comprehensive examination is done in order to check for any cracks. Bearings, bushings and seals are all replaced. Usually, the replacement components used on transmission components meet OEM specifications.
A few parts like for example the water pump, torque converters, the alternator, the starter and steer axles could obtain longer serviceability after being remanufactured and having all wearable components replaced. The electronic control in the electric lift truck is maintained by the control card. This particular card could even be remanufactured with replacing all aged and worn out parts. Unlike different lift truck parts the control card could only have the worn and aged components replaced.
Remanufactured components are comprehensively inspected upon reassembly to guarantee they are in top condition previous to being sold. It is essential when purchasing reproduced parts to make sure they have undergone the proper testing and inspection procedures. On certain bigger parts like for example engines, transmissions and steer axles, OEM specification replacement components must be used.
The dealer of used forklifts and components could ensure that the reproduced components have met OEM specifications and that these parts meet industry standards. A lot of details go into remanufacturing second-hand components. This attention to detail provides more serviceability out of reproduced parts opposed to the components that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Detroit, Michigan
forkliftpartsdetroit.com
Email Us
About Us